• Lifting gate fitting for wooden gates, for uneven terrain, Material: fittings: raw steel, Surface: fittings: hot-dip galvanised, ball angle joint and fastening material: galvanised, for screwing on
  • Lifting gate fitting for wooden gates, for uneven terrain, Material: fittings: raw steel, Surface: fittings: hot-dip galvanised, ball angle joint and fastening material: galvanised, for screwing on

Lifting gate fitting for wooden gates

for uneven terrain
Art.-No. 219611

fittings: raw steel, fittings: hot-dip galvanised, ball angle joint and fastening material: galvanised, for screwing on

Fastening type:
ZAUFSCHR
Material/surface:
fittings: raw steel, fittings: hot-dip galvanised, ball angle joint and fastening material: galvanised, for screwing on
UNIT:
1
PU:
Piece
Systems:
HEBTO
Surface / Colour:
VERZ
Material:
Steel
Weight per UQ (kg):
5.17 kg
  • usable with left and right stop
  • the gate can open more than 90°
  • The gate rises when opened. The incline (up to 7°) can be adjusted at different positions and depends on the size of the gate.
  • load-bearing capacity of 75 kg for a gate width of 1500 mm
  • A square post at least 80 mm wide is required for assembly.
  • One set for a gate leaf consists of one upper and one lower hinge, each 550 mm, one upper screw-on plate 80 x 80 x 7 mm, one lower screw-on plate 100 x 80 x 100 mm, two ball angle joints, greased, galvanised, fixing screws, and assembly instructions. Packed in cardboard box.